Price:

The AirX 45 Foot Guyed Tower Kit can be installed in a few hours.

Includes everything except pipe and anchors.

Guyed towers are the standard for simple and durable tower installations. These towers are tilt-up for easy erection. All parts are threaded, so no welding is required. All parts are included except several lengths of steel pipe. Please note: This kit includes galvanized steel cable, not stainless steel cable.

The 45 foot tower kit includes:

1 x Base Connector
1 x Upper Wire Set (280 ft. pre-cut)
1 x Lower Wire Set (160 ft. pre-cut)
2 x Base Staples
3 x 3/8"x1-1/2" Bolt
3 x 3/8" Locknut
8 x Cable Thimbles
16 x Cable Clamps

1 x Setup Kit including:
 1 x Gin Pole Cap
 1 x 100 foot Rope
 3 x Snap Links
 1 x 8 foot Cable
 1 x 3/8"x1-1/2" Bolt
 1 x 3/8" Locknut


Pipe Pieces Required (to be obtained locally):

Tower Kits use 1-7/8 inch (47.5 mm) Steel Tubing

1 x 24 foot (7.2m) length for tower
1 x 21 foot (6.3m) length for tower
1 x 6 foot (1.8m) length for tower base
1 x 21 foot (6.3m) length for gin pole

We recommend using 'Schedule 40' pipe with a minimum wall thickness of .140 inch (3.6 mm).  For sites with a maximum wind speed of 80 mph or less, 'Schedule 20' pipe with a minimum wall thickness of .090 inch (2.3 mm) may be used.