Price:

Lorentz PS150, 21 Volt, 75 Watts (Lorentz-Solar panel) on a Fixed Array.

This is a complete Solar Pumping kit, including ground mount array frame, solar panel, pump, controller etc.

Head	Litres/Day
2 Metres	12,000L
4 Metres	9,000L
7 Metres	4,000 L
10 Metres
14 Metres
22 Metres

*Based on 6 Sun Hours per day

Solar operated submersible pumps, 4"

• lift up to 22m
• flow rate up to 5’000L = 1’100G/day (helical rotor)
• DIY installation kit, made simple with plugs
• virtually maintenance free
• high reliability and life expectancy
• cost-efficient pumping
• 2 years manufacturer's warranty

Applications

• irrigation
• water bores
• livestock watering
• drinking water supply
• windmill replacement
• dams, creeks, rivers & tanks
• dugout floating pump
• pond management

Pump Wet End

• centrifugal
• high life expectancy
• stainless steel non-return valve
• dry running protection via low level probe
• material: stainless steel (AISI 316,)rubber

Motor

• brushless DC motor
• water filled - no seals to leak
• IP68, pressure balanced, max. submersion unlimited
• no electronics inside motor
• dynamic slide bearings, material: carbon/ceramic
• wetted material: stainless steel (AISI 316), POM, rubber cable
• drinking water approved

Controller PS150

• controlling of the pump system and monitoring of the operating states
• charge controller included
• mounted at surface (no submerged electronic parts)
• two control inputs for well probe (dry running protection), float or pressure switches, remote control etc.
• automatic reset after 20 minutes after well probe turns pump off
• overload protection.
• protected against reverse polarity, overload and high temperature
• solar operation: integrated MPPT (Maximum Power Point Tracking)
• PS 200: speed control, max. pump speed adjustable to reduce flow rate to approximately 30%
• battery operation: low voltage: disconnect and restart after battery has been recovered
• excellent efficiency: 88% (motor & controller)
• enclosure: IP 54 (sealed and weatherproof)

The Kits do not include: