"..thank you again for a job well done..we are very happy to recommend your company", J & J Edwards, Unley

 
 
 

 



Lorentz PS600-105V 375W

Price:





        
Lorentz PS600-105V 375W

Lorentz PS600, 105 Volt, 375 Watts (5 x Lorentz 75W Solar panels) on a Fixed Array.

This is a complete Solar Pumping kit, including ground mount array frame, solar panel, pump, controller etc.

Head

Litres/Day

10 Metres

15,000 L

20 Metres

11,000 L

30 Metres

6,200 L

40 Metres

5,400 L

50 Metres

4,800 L

60 Metres

3,700 L

70 Metres

3,000 L

80 Metres

2,600 L

90 Metres

2,100 L

100 Metres

1,800 L

120 Metres

1,600 L

140 Metres

1,300 L

*Based on 6 Sun Hours per day

 

 Solar operated submersible pumps, 4"

  • lift up to 180m
  • flow rate up to 39’000L = 8’600G/day (helical rotor)
  • flow rate up to 81’000L = 17’880G/day (centrifugal)
  • DIY installation kit, made simple with plugs
  • virtually maintenance free
  • high reliability and life expectancy
  • cost-efficient pumping
  • 2 years manufacturer’s warranty

Application

  • irrigation
  • water bores
  • livestock watering
  • drinking water supply
  • windmill replacement
  • dams, creeks, rivers & tanks

Pump Wet End

  • helical rotor pump (positive displacement pump)
  • two main parts only: stator and rotor
  • stator: geometry made of abrasion resistant rubber
  • rotor: stainless steel, hard chrome plated, abrasion resistant
  • high life expectancy
  • self cleaning
  • stainless steel non-return valve
  • dry running protection via low level probe

Motor

  • brushless DC motor
  • water filled - no seals to leak
  • IP68, pressure balanced, max. submersion unlimited
  • no electronics inside motor
  • dynamic slide bearings, material: carbon/ceramic
  • wetted material: stainless steel (AISI 316), POM, rubber cable
  • drinking water approved

Controller PS600

  • controlling of the pump system and monitoring of the operating states
  • mounted at surface (no submerged electronic parts)
  • two control inputs for well probe (dry running protection), float or pressure switches, remote control etc.
  • automatic reset after 20 minutes after well probe turns pump off
  • overload protection.
  • protected against reverse polarity, overload and high temperature
  • solar operation: integrated MPPT (Maximum Power Point Tracking)
  • PS 600: speed control, max. pump speed adjustable to reduce flow rate to approximately 30%
  • excellent efficiency: 92% (motor & controller)

 The Kits do not include:

 

  • Cable to motor & low level sensor
  • Safety rope
  • remote switching
  • bore caps
  • pump floats

     

     



  • Freecall 1800 988 877 or email solar@solarshop.com.au for further information

     

     

    Home | About Us | Contact us | Jobs
    Copyright 2008 Solar Web Shop All Rights Reserved.

     
    Online Store Software